The Role Of Steam Bypass Valve

May 22, 2022 Leave a message

The three functions of the main steam bypass valve

The bypass valve of the main steam valve has three functions, you know?

Multiple Privileges No more fussing about the boiler's main steam valve. But about the bypass valve of the main steam valve, we can also

Low price for a limited time

Chat a little bit more.

transfer mode

As we all know, steam pipes need to be warmed when passing steam, and this process of heating pipes needs to be carried out slowly.

Since the operation of the large valve is very inconvenient, once it is opened, a large amount of steam will enter the pipeline, which will cause water impact and shock.

Next article

In severe cases, the pipeline and system will be damaged. In order to ensure the stability and safety of the heating process, it is next to the large valve.

A relatively small valve is set up, and this small valve is used to control the steam entering the pipeline, so as to achieve the purpose of slowly sending steam to warm the pipe, and then start the main steam valve after the warm pipe is completed.

Therefore, the bypass valve has three main functions:


Auxiliary

The first function is to protect the main steam valve, so that the main steam valve is heated evenly and avoid excessive thermal stress. main steam mode

Compared with the main steam pipe, the valve is much thicker. When the main steam pipe is heated, if the main steam valve is opened directly, the

The main steam valve is prone to great thermal stress due to uneven heating. If the bypass valve is opened first when heating the pipe, wait until the end of the heating pipe

When the main steam valve is opened again, the main steam valve is heated more evenly, and the thermal stress generated is very small.

The second function is to protect the steam pipeline system to avoid water impact,

the occurrence of vibrations, etc.


model

The third effect is ease of operation. During the heating process, due to the large pressure difference before and after the main steam valve, the main steam valve

Difficult to operate. On the one hand, the open bypass is used to warm the pipe, which makes the valve easy to open and reduces the wear of the valve sealing surface. and

And the flow interface of the bypass valve is small, and it is easier to control the heating speed.