The desuperheating and decompression device reduces the incoming steam pressure and temperature through the decompression and desuperheating mechanism to the steam parameters required for use. It is a kind of temperature reduction and pressure reduction equipment widely used in electric power, petrochemical, light industry, textile printing and dyeing, medicine, cogeneration and other industries.
What is the structure and composition of the temperature and pressure reduction device?
The temperature reduction and pressure reduction device is composed of pressure reduction, temperature reduction, safety protection, steam pipes and thermal regulation systems.
1. Decompression system: The decompression of steam is realized by the temperature reducing valve. The temperature and pressure reducing valve is connected with an electric (or pneumatic, the same below) actuator. When the steam pressure in the pipeline changes, the electric actuator starts to drive the pressure reducing valve flap up and down to adjust the pressure reduction ratio to make the pipeline The steam pressure is kept within the specified range.
2. Temperature reduction system: It is composed of electric regulating valve, nozzle, mixing pipe, throttle, throttle valve, etc. After passing through the electric regulating valve, the desuperheating water flows into the desuperheating and pressure reducing valve, and is sprayed into the valve body through the nozzle hole of the valve disc to directly mix the water and steam to realize the desuperheating of steam.
When the pressure of the supplied desuperheating water exceeds the working pressure, in order to make the electric regulating valve and the nozzle still work normally, a throttle is installed on the water supply pipeline before the electric regulating valve, so that the desuperheating water enters the electric regulating valve through the throttle. The pressure remains within the specified range.
The electric control valve usually adopts the plunger type, and the valve stem is connected with the electric actuator. When the steam temperature in the mixing pipeline changes, the temperature adjustment system controls the electric actuator to drive the movement of the electric control valve stem, adjust the amount of water sprayed into the valve body by the nozzle, and keep the steam temperature in the pipeline within the specified range Inside.
In order to prevent the pressure of the desuperheating water in the water supply pipeline from suddenly decreasing during operation, and the phenomenon that steam is generated backwashing into the water supply pipeline through the nozzle, a check valve is installed on the desuperheating pipeline near the nozzle.
Temperature and pressure reducing device
3. Safety protection system of temperature and pressure reducing device: spring safety valve (or main safety valve) is adopted to realize safety protection. When the steam pressure in the pipeline exceeds the allowable value, the safety valve will automatically open to remove the steam. When the pressure returns to the specified value, the safety valve is automatically closed. Keep the secondary steam pressure within the allowable value to ensure the safe operation of equipment and pipelines.
4. The thermal regulation system of the temperature and pressure reducing device: realize the control of the electric temperature and pressure reducing valve and the electric regulating valve, and there are various forms such as automatic control, remote remote control or on-site manual control.

